- Material Specification :  Width: Max. 300 mm, Length: 100 m (customer specification)

- Feeding Speed : 4 ~ 100 mm/sec

- Membrane length in Chamber : about 14 m

- Dip Tank Roller and Tank : Changeable, Stainless steel tank & rollers 

- Dip Tank :  Temperature control   

- Dry Oven : heat air circulation type

- Size : 8.0(L) x 2.0(W) x 1.9(H) mm   

- Main Power : 380VAC, 3P. 4Line, 50/60Hz

- Compressed Air : 5 ~ 7 Kg/㎠ Cleaning Air, consumption -500L/Min

- Part Name

 A. Dipping Part

      Membrane feeding part + Water Bath

      Tubing Pump

      Water Bath Temp. Control : 40 ~ 80℃ 

 B. Dry Chamber Part

      Dry Zone 1, Dry Zone 2, Dry Zone 3, Air Dryer

      3 Zone individual temp. control : 50 ~ 80℃, Max 100℃

 B. Winding Part

     Main Motor, EPC, Winder

     EPC(Edge Position Control)

 

1) Material – customer specification

 A. Membrane Roll : 270mm(W) * 100M(L)

 B. Double sided Tape : 260mm(W) * 100M(L)

2) Feeding Speed : 50 ~ 100mm/sec

3) Required manpower : 1 person

4) Compressed air : 5 ~ 7 Kg/㎠ Cleaning Air

5) Size : 3,360(L) x 850(W) x 1,460(H) mm

6) Main Power : 1P220V 50Hz 20A

7) Part Name

  A. Tension control

    i. Powder brake, Powder clutch, Tension controller

  B. Slitting motor

    i. Servo motor, Driver

  C. Winding motor

    i. Speed control motor

 

1) Size : 4,000(L) x 700(W) x 1,410(H)mm

2) Main Power : 1P 220V, 50Hz

3) Air : 5~7 kgf/㎠

4) Card size : 80mm, 120mm * 100M

5) Membrane size : 5.0mm * 100M (2~12 line)

6) Cutting size : 256mm ± 1mm (adjustable)

7) Specification of each section

 A. Feeding motor - Stepping motor

 B. Re-winding motor - Speed control motor

 C. Cutting motor - eversible motor

 D. Discharging motor - Induction motor

 E. Tension control - Powder brake, Tension controller