• Equipment
  • Immunoassay

Equipment

Immunoassay

Specialized Eequipment

  • ※ This equipment shown in the image is a 3-material Laminator.

Material Laminating

Backing Card + 3 materials (Membrane. Absorbent Pad, Sample Pad - Interchangeable) Feeding > Laminating > Cutting

Manual Laminator - Technical Specifications
Model No. LSC-0000
Capacity 720 cards/hour (Based on 300mm card)
Backing Card Width 50~100mm
Material Roll Type - Membrane, Pad
Size 2,100(L) × 600(W) × 1,600(H) mm
Based on 3 Material Laminator
Optional Features 1~5 Roll Material Lamination (Option)
Roll-Type Backing Card - Applicable (Option)
Non-Stop Cutting (Option)

Material Laminating

Backing Card + Material (Cover tape) Feeding > Laminating > Cutting

Manual Laminator - Technical Specifications
Model No. LMC-1000
Capacity 720 cards/hour (Based on 300mm card)
Backing Card Width 50~100mm
Material Roll type - Cover Tape
Size 1,000(L) × 500(W) × 500(H) mm

Reagent Dispensing

Card Feeding (Membrane Laminated) > Dispensing > Collect

Manual Dispenser - Technical Specifications
Model No. DMC-4000
Capacity 360 cards/hour
Method 1~8 Channels (Precision Syringe Pump)
Dispensing Volume Microliter to Nanoliter
Size 700(L) × 500(W) × 500(H) mm
Small Size, Light Weight
Features Various Type Dispensing Tip Applicable (Option)
Contact type Tubing Tip
Non contact type Sol Valve, Piezo Valve, Air Jet Spray
Tip height Precisely Adjustable

Reagent Dispensing

Backing/ Membrane Roll Feeding > Dispensing > Inspection > Marking > Drying >
Re-Winding

Reel to Reel Dispenser - Technical Specifications
Model No. DRR-5000
Capacity 40 min/roll (100M/roll, 50mm/sec)
Method 1~5 Lines (Precision Syringe Pump, Tubing Tip)
- Customer Specification
Dispensing Volume Max. 10μL/cm
Temp. Range Max. 60℃
Temp. Accuracy 50 ± 2℃
Size 3,200(L) × 600(W) × 1,500(H) mm
Tip height Precisely Adjustable
Optional Features Vision & Marking System : For Dispensing Defect Inspection (Option)
Membrane Compatibility : 25/30mm Dual-Use (Option)

Finished Card Cutting

Card Feeding > Slitting > Strip

Manual Slitter - Technical Specifications
Model No. SMC-5000
Capacity 720 cards/hour
Card Width Max. 120mm
Card Length Max. 330mm
Slitting Size Customer Specification
Size 700(L) × 400(W) × 400(H) mm
Small Size, Light Weight
Features Card Cutting Position Auto Alignment (Option)
Card Auto Feeding (Option)

Finished Card Cutting

Card Feeding > Slitting > Strip

Auto Feeding Slitter - Technical Specifications
Model No. SMC-5000
Capacity 720 cards/hour
Card Feeding Method Automatic (Card Magazine)
Card Width Max. 120mm
Card Length Max. 330mm
Slitting Size Customer Specification
Size 900(L) × 800(W) × 1,600(H) mm

Cassette Assembling

Strip Inserted Bottom Cassette > Top Cassette Placed on Bottom Cassette >
Move along the Conveyor > Roll Press to Complete Assembly

Conveyer & Pressor (Integrated Tyep) - Technical Specifications
Model No. EMD-3000
Conveyor Speed Adjustable
Size 3,300(L) × 1,100(W) × 1,000(H) mm
Small Size, Light Weight
Features Longer or Shorter Conveyor Length Available
(Customer Specification)

Cassette Assembling

Strip Inserted Bottom Cassette > Top Cassette Placed on Bottom Cassette >
Move along the Conveyor > Roll Press to Complete Assembly

Conveyer & Pressor (Table Top Type) - Technical Specifications
Conveyor Speed Adjustable
Size 1,600(L) x 300(W) x 300(H) mm
Small Size, Light Weight
Features Longer or Shorter Conveyor Length Available
(Customer Specification)

Buffer Solution Filling & Capping & Labeling

Bottle Feeding > Filling > In-cap Assem > Cap Placing > Screw Capping > Labeling > Inspection > Discharging

Filling & Capping & Labeling System - Technical Specifications
Model No. FCL-2000
Capacity 1,800 bottles/hour (4mL/bottle)
Method 2 Channels (Tubing Pump)
Dispensing Volume Milliliter
Size 3,400(L) × 2,500(W) × 1,500(H) mm
Features All Materials - Auto Feeding by Feeder and Conveyor
Capping by Servo Motor and Torque Controller
Filling Volume Inspection and NG Product Auto Collected
Labeling Position is Adjustable at Touch Screen
  • ※ This equipment shown in the image is a 2-Strip Cassette Device Assembler.

Semi-Automatic System is comprised of several modules that automatically assemble and process multiple base test components to produce the final product of rapid test kit device.
The system cuts into strips, places them inside bottom devices (manually fed), places top devices onto the bottom piece, presses them together, and then are discharged to collection bin to complete the assembly process.
A full-automatic system with auto-feeding and multiple-device options is available based on customer preference.

Assembling

Top/Bottom Cassette Feeding > Cutting & Placing > Pressing

Semi-Automatic Assembler - Technical Specifications
Model No. ASD-2002
Strip Size 4.0mm, ± 0.1mm
Capacity Max. 1600 devices/hour (Based on Takt Time)
Control Panel PLC (Touch Screen)
Cutter Type Guillotine Cutter Type
Device Presser Dual Press System : Press Cylinders (1st) & Roller Press (2nd)
Features Card Feed Section (SCP) x 2 set for 2 Kinds of Card
for Card Cutting & Inspection
Dimensions About 5,300(L) x 1,100(W) x 1,800(H) mm
Power 220V/50~60Hz, Single Phase
Air Requirement 5~7kgf/cm2 (Regulated Air Supply)
Inspection Stations
  • Inspection for Fed Device (Sensor)
    : Detection of Fed Device’s Wrong Orientation
  • Inspection for Fed Finished Card (Vision System)
    : Detection of Fed Card’s Wrong Orientation, NG Marking
  • Inspection for Strip Inserted Device (Vision System)
    Detection & Discarding of Empty Device, Wrong Orientation and NG Mark

Pouch Sealing

Pouch / Cassette / Silica Gel Feeding > Auto Insert > Sealing

Pouch Sealing Machine - Technical Specifications
Model No. PPD-2000
Capacity 1,400~1600 pouch/hour (as per Worker’s Feeding Speed)
Size 2,700(L) × 1,200(W) × 1,800(H) mm
Control Panel PLC (Touch Screen)
Sealing Method Heat Sealing (2 Times)
Silica-gel Bag Feeding Roll Feeder 1 set
Pouch Feeding Pick & Place Method
Cassette Feeding From Magazine
(Automatically switches to a new magazine when pouches in the current magazine are run out.)

Rewinding

Membrane Rewinder - Technical Specifications
Model No. WMR-1000
Capacity 5 min/roll (100M/roll)
Method Torque, Speed Control
Size 600(L) x 500(W) x 1,500(H) mm
Features Unwinding Part - Tension Control
Rewinding Part - Speed Control
Process End Alarm

Tube Feeding & Printing

Tube Feeding by Bowl Feeder > Conveyor > Printing > Discharging

Tube Feeder & Printer - Technical Specifications
Capacity About 7,000 bottles/hour (Feeding & Work Speed Adjustable)
Tube Feeding by Bowl Feeder
Tube Feeding Interval - Adjustable by 2 Steps Conveyors
Printer Inkjet Type
Size 1,300(L) × 800(W) × 1,800(H) mm
(Bowl Feeder Size Not Included)
PLC & Touch Screen Controller Option (Work Counter, Easy Work Control)

Labeling

Labeler - Technical Specifications
Model No. LNT-1100
Capacity 2,400 bottles/hour
Method Round Side Labeling
Size 1,600(L) x 1,300(W) x 800(H) mm
Features Various Type Bottle Applicable (Option or Manual Setting Required)
Labeling Position is Adjustable at Touch Screen